The present study on bulk carbonate 87Sr/86Sr stratigraphy represents a companion work to earlier research that presented a conodont apatite-based Ordovician seawater 87Sr/86Sr curve for the Tremadocian–Katian Stages (485–445 Ma). Here, we directly compare the curve based on conodont apatite (including some new data not published in earlier work) with a new curve based on 87Sr/86Sr results from bulk carbonate from the Tremadocian–Sandbian Stages. We sampled eight Lower to Upper Ordovician carbonate successions in North America to assess the reliability of bulk carbonate to preserve seawater 87Sr/86Sr and its utility for 87Sr/86Sr chemostratigraphy. A high-resolution 87Sr/86Sr curve based on 137 measurements of bulk conodont apatite is used as a proxy for seawater 87Sr/86Sr (87Sr/86Srseawater). In total, 230 bulk carbonate samples that are paired to conodont samples were measured for 87Sr/86Sr in order to determine the conditions under which 87Sr/86Srseawater is preserved in bulk carbonate. Results indicate that well-preserved bulk carbonate can faithfully record the 87Sr/86Srseawater trend, but that its 87Sr/86Sr values are commonly more variable than those of conodont apatite. On average, bulk carbonate samples of the same age vary by 10–20 × 10–5, compared to 5–10 × 10–5 for conodont apatite. The amount of isotopic alteration of bulk carbonate from seawater 87Sr/86Sr (Δ87Sr/86Sr) was determined by taking the difference between 87Sr/86Sr values of bulk carbonate and the approximated seawater trend based on the least radiogenic conodont 87Sr/86Sr values. Cross plots comparing Δ87Sr/86Sr values to bulk carbonate Sr concentration ([Sr]) and conodont color alteration indices (CAI; an estimate of the thermal history of a rock body) indicate that bulk carbonate is most likely to preserve 87Sr/86Srseawater (minimally altered) when either: (1) bulk carbonate [Sr] is greater than 300 ppm, or (2) carbonate rocks experienced minimal thermal alteration, with burial temperatures less than ∼150 °C. Carbonates with intermediate [Sr] (e.g., between 130 and 300 ppm) can also yield 87Sr/86Srseawater values, but results are less predictable, and local diagenetic conditions may play a greater role. Modeling results support the argument that seawater 87Sr/86Sr can be preserved in bulk carbonates with low [Sr] if pore water:rock ratios are low (<10–100) or if pore fluid 87Sr/86Sr is similar to the seawater 87Sr/86Sr value preserved in limestone. Bulk carbonate samples that meet these criteria can be useful for high-resolution measurements of 87Sr/86Srseawater, with a sample variation on par with fossil materials (<10 × 10–5), particularly for successions where well-preserved fossil material (i.e., conodonts or brachiopods) is not available, such as Precambrian strata, sequences recording mass extinction events, or otherwise fossil-barren facies. These criteria and model predictions based on bulk carbonate [Sr] must be considered in the context of whether a limestone accumulated under calcite seas (e.g., Ordovician), with relatively high seawater Sr/Ca, or aragonite seas, in which case the diagenetic transformation of aragonite to calcite may result in incorporation of non-seawater Sr.
- Received 6 June 2014.
- Revision received 25 January 2015.
- Accepted 17 February 2015.
- © 2015 Geological Society of America